中文 EN
Ceramic cell electrolysis porous ceramic cylinder plain burning cylinder

【Place of Origin】:Yixing, Jiangsu

【Application】:Automobile plastic parts, bathroom parts, etc

【Email】:stysied@jiangsuceramics.com

【Tel】:86-510-87183775 / 87185940

87183710 / 87438766

product details

Ceramic electrolyzer is also called electrolytic ceramic cylinder, plain burning cylinder (barrel), electrolytic ceramic diaphragm, trivalent chromium ceramic bladder, ceramic bladder, regenerative ceramic tank, trivalent chromium electrolytic machine, etc.

It is formed by grouting and high-temperature sintered.

Electrolytic ceramic diaphragm is a regenerating device of plastic electroplating, liquid which is widely applied in electroplating manufacturers. In particular, the quality requirements of plastic electroplating are high, such as automotive plastic parts, bathroom parts, etc. The plain burning cylinder can prevent the aging of the roughing liquid, reduce the trivalent chromium concentration in the roughing liquid, maintain a good roughing effect, reduce the production cost and greatly reduce the environmental pollution of chromic acid.

In addition, in the production of decorative chromium and hard chromium, the principle of electrolysis can better remove the impurity cations in the electroplating liquid and reduce the trivalent chromium concentration in the plating, so as to improve the quality of electroplating products and prolong the service life of the plating solution.

Existing size:

Cylinder: Ф 100x500mm, Ф 210×650mm

Square cylinder: 500×390x80mm,500x160x80mm,1000x100x60mm,600x398x80mm

FAQ:

  • 1.How can I get a quote?
  • You can send drawings with technical requirements and mark the quantity you need to purchase. It would be better if you could provide information about the use of the product.
  • We will confirm the most suitable materials and offer you the most favorable price within 24 hours.
  • 2.Can you accept OEM and ODM?
  • Yes, we can produce products according to your requirements and drawings.
  • 3.Can you provide free samples?
  • Depending on the situation, we can provide samples for small products free of charge, but the freight and mold fees shall be borne by you. High value products cannot be provided free of charge due to cost problems.
  • 4.What is the lead time for samples?
  • Ready made products are within 3-7 days, and customized samples are generally within 15-45 days.
  • 5.How many days is the production cycle for bulk orders?
  • It usually takes 30-45 days, and 45-60 days in peak season.

Office address:196 Dingshan North Road, Dingshu Town, Yixing, Jiangsu, China

Person in charge: li ping

Email:stysied@jiangsuceramics.com

Tel:87183775 / 87185940
87183710 / 87438766